 |
 |
| TYPE | Special purpose test equipment, portable circuit breaker analyzer |
| PHYSICAL SPECIFICATIONS | 16” W by 11” H by 14” D (40.6 cm x 29.9 cm x 35.6 cm) Weight: less than 25 lbs (11.3 kg) |
| INPUT POWER | 90-130 Vac or 200-240 Vac (selectable), 50/60Hz |
| DRY-CONTACT INPUTS | 3, 6 or 12 dry-input channels. Each channel detects Main and Insertion-Resistor Contacts |
| TIMING WINDOWS | Selectable: 1-second, 10-seconds, 20-seconds |
| TIMING RESOLUTION | ±50 microseconds at 1-second duration ±500 microseconds at 10-second duration ±1.0 milliseconds at 20-second duration |
| TIMING ACCURACY | 0.05% of reading, ±0.05 ms at 1-second duration |
| DRY CONTACT CHANNEL PROTECTION |
Fuses protect all isolated power supplies. All contact inputs are grounded until test. TVS and Zenerdiode protected. |
| DRY-CONTACT DETECTION RANGE |
Closed: <20 ohm, Open:> 5,000 ohm |
| RESISTOR DETECTION RANGE | 50 to 5,000 Ohm |
| TRIGGER INPUT VOLTAGE | Open/Close: 30-300V dc or peak ac |
| VOLTAGE SENSING INPUT RANGE |
V1: analog input; 0-255V dc or peak ac, Sensitivity ±1V; V2: voltage detector (present/absent) input; 30-300V cd or peak ac |
| BREAKER OPERATION | Initiate Open, Close, Open-Close, Close-Open, Open-Close-Open |
| BREAKER INITIATE CAPACITY | 30A/250V ac/dc max |
INITIATE CURRENT |
One, Non-contact, Hall-Effect sensor, 0-20A, dc to 5Khz |
| DIGITAL TRAVEL TRANSDUCER INPUT |
3 digital travel transducer channel; Linear range, 0.0-60.0 in (±0.01 in); Rotary range 0-360° (±0.36°) |
| RESISTOR TYPE TRANSDUCER INPUT |
200 Ohms to 10K Ohms (optional) |
| CONTACT TRAVEL POINT DIFFERENCE |
Measures “Slow-Close” contact-point distances (hard copy) |
| DISPLAY | 4 lines by 20 character back-lit LCD, sunlight viewable |
| PRINTOUT | Both graphic contact and travel waveforms & tabulated results are printed on 4.5-inch thermal printer |
| TEST RECORD STORAGE | Store up to 100 timing records and 99 test plans |
| COMPUTER INTERFACE | USB and RS-232C port |
| PC SOFTWARE | Furnished Circuit breaker analysis software running under Windows XP; features graphic display, numerical reports, and data base utility for use at shop or office. |
| SAFETY | Designed to meet UL 6101A-1 Certification and CAN/CSA C22.2 No 1010.1-92 |
| ENVIRONMENT | Operating: -10°C to 50°C (+15°F to +122°F) Storage: -30°C to70°C (-22°F to +158°F) |
| OPTIONS | Hard case for shipping; available for both Travel Transducers and CT-7000 |
| WARRANTY | One-year warranty on parts and labor |
 |
|||||||||||
       |
|||||||||||
|
|||||||||||
